Most of us don’t mind whether the level of water in our toilet is high or low. But when left unfixed, this minor problem can turn into a huge mess. Clogs and blocks are two common problems you may experience when the tank doesn’t have sufficient water. On the other hand, overflowing could also be an issue in a toilet with too much volume of water.
Fortunately, these two toilet issues can be fixed easily. A high or low water in the toilet bowl can be fixed with hands or a screwdriver. In other words, you don’t need to hire a plumber to do the work for you unless you are too busy with your work.
Related Articles:
- 11 Best Drain Cleaners for Clogged Toilets, Sinks, and Drain Lines
- What is a Plumber?
- What is Trenchless Sewer Repair?
How to Fix High Toilet Water Level
Does the level of water in your toilet is quite higher than normal? Here are ways how you can fix it.
Unclog the Pipes
When you notice that the level of water in your flushing toilet is high, the first thing you should check is the pipework. In most cases, the high level of toilet water is caused by clogged pipes. As a result, the water can’t flow through the pipe, causing it to stay in the bowl.
What’s worse is that flushing the toilet continuously will make the water rise, which causes it to overflow. If you think that clogged pipes are the reason why the level of water in your toilet is too high, you can check the pipes in your bowl for possible items that block the toilet, including tampons o diapers. You can do this with your hands wrapped by a pair of gloves.
On the other hand, if you suspect that the blockage is near the end of the pipe, you may use a plunger. In addition, you may also pour chemical products that can unblock the pipe. If none of these two work, try calling a plumber.
Low Water in Toilet Bowl
There are some reasons behind too low toilet water level. When you think that the level of water in your toilet is insufficient, the first thing you should do is to check the toilet’s tank.
Adjusting Low Toilet Water Tank
The first thing you should do is to check if the toilet’s tank has enough water level by removing its lid. The ideal water level should be an inch below the overflow tube and fill valve. When you find that the water level is lower than the fill valve, the best thing you can do is to adjust the tank’s water level.
Toilet tank mechanisms come in different variations. But most toilets use the floating variety that is also available in a cylinder or ball type. No matter what variety of toilet tank systems you have, its main work is to ensure that the water level is sufficient.
To adjust the water tank, the first thing you should do is to plug off the toilet’s water supply. Close the external water valve. Free the tank from water by continuously flushing the toilet. Close the valve properly to keep the water out of the tank.
Once done, adjust the ball height to your desired level. Do this step using a screwdriver. After making a few adjustments, turn back the other parts you removed earlier. Turn on the water system to fill the tank. After this step, your toilet should have the proper water level.
Cracked Toilet
The crack toilet might also be the reason if your toilet has a low water level. Once you notice small cracks around your toilet – whether internal or external, it should be fixed right away to avoid further problems that can lead to costly repairs over time.
When a cracked toilet is your problem, the best option you have is to purchase a new one. When replacing the old and cracked toilet, make sure to do the installation properly to avoid any problems in the future.
If you don’t know how to install a toilet, you may hire a professional for toilet installation.
Conclusion
Just like the other common plumbing issues you encounter all the time, the first step to solving the problem is to determine its cause. If the water level of your toilet is too high or too low, you should check its pipes, water tank, or even the external surface for possible cracks.
As you may notice, all the tips we mentioned above do not require you to spend a lot or use special tools. Share this post with your friend so that he/she will know how to adjust the toilet water level.
As soon as you find the problem, make sure to fix it immediately. Do not leave it unfixed as it could cause further problems that require more expensive solutions.
We hope this article helped you to determine the proper ways you can do to adjust the water level of your toilet.
Looking for a Trusted Plumbing Company in Seattle, WA?
If you’re experiencing any plumbing issues such as drain blockages, drain leaks, or have any general questions related to your home or commercial plumbing feel free to reach out to one of our plumbing experts at The Pipe Doctor for a FREE estimate!
The Pipe Doctor
(206) 676-2192
1 (877) 234-9532